Taskmaster, Super Shredder, Dimminutor, Spiralift and Autorake, Grinders, Shredders and ScreensDelumper,  Definer, Vulcanator, Super Shredder and Supreme Roll Mills, Crushers and Granulators.Taskmaster Heavy-Duty  Twin Shaft Shredders employing up to 125 HP motors.
 


Testimonials

Franklin Miller would welcome your comments as well.

 

Mark Gensal-Shickskinny Wastewater Treatment

"The Taskmaster performed perfect. It's fantastic. I'd say it relieved 95% of our problems as far as the pumps jamming up before the clarification tanks."

"With the Taskmaster we're 95% clear of any maintenance on the pumps. We had a lot of problems with jam ups, clearing the propellors out before we installed the Taskmaster. Now, it's clean."

Denville Sewer Utility, Denville Township, NJ

"We have a Franklin Miller Super Shredder which is basically maintenance free. It shreds up all your incoming rags and debris to very small particles which prevents us from having to worrying about cleaning bar screens and unclogging jammed propellors and send it off so small that at the treatment plant it is hardly nocticeable. We have 13 pump stations. When we start upgrading some of our older pump stations, I will be insisting that Franklin Miller Super Shredder be installed at all of our upgraded stations."

Tina Myers-Wastewater Dept Supervisor-New Holland

We have five Super Shredders installed in our plant ahead of our sludge pumps. They have been here for six and a half years, since the upgrade of the treatment plant and we've had to do no major maintenance at all on the units. We do routine greasing and oil changes. We are very happy with the units and would install them again."

Timothy Timbrook-S. Monmouth Regional Sewage Authority

"It is impressive. Yes, you can drop the flow that much with one machine(the Dimminutor). The original application was of course 2 comminutors. So you are doing with one machine basically what you were doing with two."

Ray Klett-Tom's River, NJ-Dover Municipal Utilities

"(The Dimminutor) cuts down on my man hours labor in excess of 10 to 15 hours per week." Now this unit has approximately 70,000 hours of use on it. It's hard to kill. If it hits something that's solid in there, it will reverse itself and clean itself out. It's taken away a lot of headaches. In the area we are in, I think our biggest offender is sand. Sand does a job on anything as anyone knows. However, no problems what so ever with this unit."

Scott Gillespie Wastewater Treatment Plant Supervisor-Northampton, PA
"The nice feature about the Franklin Miller Grinders(Super Shredder) is that the cutting blade automatically reverses with each new operaton. This, in my opinion aids in keeping cutting blades wear even and to a minimum. I worked at another wastewater treatment plant that had a competitor's grinder and the grinder was fine except that the motor leads had to be physically changed to get a reverse in the cutting blade direction. This caused pumping problems because motor reversing was not done in a timely manner. With all the duties this staff has to perform at this plant it is nice to not have to hassle or worry about the Franklin Miller grinders."

Don Moore of Yountville WWTP


The SPIRALIFT has done wonders for our plant. It’s working beautifully. We’re really satisfied with the performance

Read More>click here.

Matt McClimans-Cromwell CT-Mattabassett District Operator

"Dimminutor is our first line of defense and probably our best line of defense for the rest of the plant. We formerly had an oscillating design and when that would get stuck or something jammed in, it did not have the ability to free itself. With the Dimminutor if something is in there it will stop or it will reverse and whatever is jammed in the unit is basically freed and is chopped up."

Dan James, Maintenance Manager of Central Valley WRF

"We were experiencing more and more large objects coming into the headworks of our plant. The unit [TASKMASTER 1630 Screenings Grinder] has operated perfectly to stop the plugging in the screenings conveyance piping and has been instrumental in protecting our downstream equipment."

 

 





News
Contact Us

Special: Used and Surplus Equipment
Home   About   Products   Contact Us   Systems   News   Site Map   Wastewater   Industrial   Solid Waste
Franklin Miller, Inc. 60 Okner Parkway, Livingston, NJ 07039 -- Tel: (973) 535-9200
Copyright © 2003 Franklin Miller, Inc. All Rights Reserved. Web Management by River.