|
DELUMPER® BAGSTATION™
The DELUMPER BAGSTATION is a pre-engineered bag dump system designed for unloading, de-agglomerating and freshening of lumpy bagged solids while efficiently introducing them into a production process. The unit is designed to facilitate convenient manual opening of small to medium sized bags without creating a dusty environment.
The system incorporates a built-in DELUMPER® processor to reduce agglomerates and lumps and facilitate uniform product flow while the bags are being emptied. The BAGSTATION has a built-in dust filter system that draws the air through the unit grate and into the enclosed filter chamber. Filter media are periodically self-cleaned by a programmed air burst cycle. Read More >> DELUMPER BAGSTATION
|
 |
SPIRALIFT®SLX - FINE SCREENING OF HEAVY INSTITUTIONAL EFFLUENT
The Spiralift®SLX system provides fine screening for heavy prison and institutional wastewater applications. This powerful system effectively handles concentrated solids including clothing, sneakers, sheets, blankets, wood and other debris that clog and cause backups in units not built for heavy institutional effluent service. Read More >> SPIRALIFT SLX - Fine Screening of Heavy Institutional Effluent |
 |
AUTORAKE® AR 1400 - NEW HYDRAULIC BAR SCREEN
The AUTORAKE® Model 1400 is a front cleaned, hydraulic bar screen uniquely adapted for deep channel installations. The unit’s design coordinates the motion of a mobile rake comb, which travels up and down driven by a hydraulic motor and sprocket. As the rake comb reaches the bottom of the screen, it turns 90 degrees and inserts its tines into the bar slots. The motor, rotating in reverse, smoothly and efficiently lifts trapped screenings upward. The unit is suitable for very deep channels with a total travel of up to fifty feet. Read More >> AUTORAKE 1400 - New Hydraulic Bar Screen |
 |
SUPER SHREDDER® DISINTEGRATORS ELIMINATE DOWNTIME
The Trenton Sewer Utility handles wastewater and sewage generated for the city of Trenton, New Jersey. The utility typically processes 12 mgd which can quickly rise to 27 mgd during storm events. For the past ten years, the facility has relied upon the powerful grinding capabilities of several strategically placed Super Shredder Disintegrators to ensure that operations run smoothly. “We have a combined system, which is essentially more complicated," explains Plant Superintendent, Leigh Jones. “We’re dealing with sewage from homes, businesses, and industries as well as enormous amounts of rocks, trash, grass, wood and other debris that wash in from the streets.” Read More >> Super Shredder Disintegrators Eliminate Downtime
|
 |
SR HAULER STATION MANAGES SEPTAGE RECEIVING AREA
The new S270-SRH Hauler Station is a comprehensive control system that provides an automated interface for septage truck haulers to securely access and operate a SPIRALIFT® SR septage receiving station without the need for plant personnel. This unit, coupled with the SPIRALIFT SR grinding and screening system, provides a complete turn-key solution for automating the receiving of septage into a sewage plant headworks without burdening either plant personnel or equipment. Read More >> SR Hauler Station
|
 |
TASKMASTER®SHREDDERS FOR ELECTRONICS DATA SECURITY CONCERNS
Franklin Miller has launched a new breed of TASKMASTER shredders that are optimized to completely shred hard drives, storage media, backup tapes and electronic components of all kinds. As part of the multi-step recycling process, these powerful units play a critical role in the safe destruction and disposal of electronic scrap. Read More >> TASKMASTER Chip Destruction |
|
TASKMASTER® CHIP DESTRUCTION SYSTEM SOLVES BLACK MARKET CHIPS PROBLEM
A major "chip" manufacturer had a security problem . Truck loads of
valuable chips were exposed to pilferage. Each drum of chips was
worth more than it's weight on gold making it a tempting
target. As a result, substandard chips were showing up on the
black market. A solution was needed urgently. That's when the
company turned to Franklin Miller Inc for a solution. Read More >> TASKMASTER Chip Destruction |
 |
TASKMASTER® GRINDERS FEATURE HIGH-FLOW “DROP-IN” DESIGN
TASKMASTER TM8500 series inline grinders quickly and effectively reduce sewage and sludge solids to fine particles directly in pipeline systems. Along with innovative "Cutter Cartridge Technology", these grinders now feature a convenient “drop-in” housing. This unique design allows for fast and easy removal of the cutter mechanism for periodic maintenance without sacrificing unit strength. These units have the same proven, high quality mechanical seal design found in Taskmaster channel grinders. Read More >> TASKMASTER TM8500 |
|
TASKMASTER® TITAN DUPLEX Powerful, Hi-Flow Twin Shaft Channel Grinder
The TASKMASTER TITAN DUPLEX (TM 14000D) builds on the TITAN's major innovation in twin shaft channel grinding technology. The TITAN combines powerful channel grinding capability with high flow capacity and low headloss. The result is superior performance in both grinding and liquid handling. With the TASKMASTER TITAN DUPLEX two complete set of twin shaft cutter stacks are employed for twice the flow capacity and channel width. Read More >> TITAN Duplex |
|
SPIRALIFT® SR: Solves Major Septage Disposal Problem
Septage haulers in a rural Florida County used to offload their truck’s gooey contents into a large open field. That all changed when the local residents’ complaints about noxious odors led to television and newspaper coverage. That’s when county officials directed the local wastewater treatment facility to come up with a better method of septage disposal. The plant manager researched the available options and spoke to other plants. Based on the information gathered, a decision was made to purchase a Spiralift SR from Franklin Miller Inc. Read More >> SPIRALIFT SR |
|
PIPELINE DELUMPER®REDUCES SOLIDS INLINE
The PIPELINE DELUMPER is a powerful in-line processor that crushes, disperses and suspends tough solids in fully enclosed pipe systems. This unit eliminates blockages, works the stream to free flow and prevents damage to pumps and other equipment. It is suitable for wet, dry, pressure or gravity systems. In applications worldwide, the PIPELINE DELUMPER has demonstrated its processing and cost effective benefits. Read More >> PIPELINE DELUMPER
|
|
The new DIMMINUTOR DX (DUPLEX) has two complete systems built into one frame for twice the flow capacity as prior Dimminutor models. This powerful unit features two complete systems including: drive,rotor and screens. It can fill out today’s wider channels and handle flow rates up to 64 (mgd) million gallons per day (10100 m3/hr). Read More >> DM Duplex |
|
The Valley forge Pump Station receives daily on average 500000 gallon influent. It has been in operation for about 20 years. While visiting Valley Forge Sewage Plant the plant operator, Jim Brennan, informed us that they have a Taskmaster Shredder installed in front of the pumps, to eliminate the clogging problem. This hydraulically driven Taskmaster Shredder has been installed for about 4- ½ years. Read More >> Sewage Treatment Plants
|
|
The Borough of Shickshinny Sewer Plant faced a major operational problem. The plant, which has been in operation since 1979, services mostly residential areas, parts of two boroughs and a neighboring prison. It uses an activated sludge, secondary treatment process to process 500 MGD. Even though Shickshinny’s plant had a grinder located in front of the pumps, their pumps were still jamming frequently. Read More >> Grinder Saves The Day
|
|
The City of Kirksville, Mo. had a problem. Their 25 year old Smith and Loveless comminutor suddenly stopped working and could not be repaired. Their main barscreen could not handle the complete flow of the plant headworks at daily peak periods which meant that unreduced solids could get into the plant’s downstream equipment and cause severe operational difficulties. The City found out that the replacement cost for a similar design unit was going to cost over $60,000.00, way over their budget. Read More >> Taskmaster Grinder Saves Over $36,000
|
|
The Southern Research Institute in Birmingham, Alabama conducts basic research for medical, environmental and engineering companies. The institute was faced with major waste management and disposal problems. The laboratories in the facility produces copious amounts of waste, much of it made of plastic and medical packaging materials. To be incorporated into landfills, the waste needed to be reduced to an unrecognizable state. Read More >> Research Institute Cuts Waste Problem
|
|
The Lower Bucks County Joint Municipal Water Works Authority in Levittown, Pennsylvania is an activated sludge primary treatment plant. The facility is responsible for thirteen lift stations in the district and processes 10 million gallons of wastewater per day. Read More >> Destroyed by Taskmaster
|
|
The Central Valley Water Reclamation Facility, located in Salt Lake City, Utah, is a thoroughly modern 65 MGD wastewater treatment plant which uses the Trickling Filter/Solids Contact Process. Like many other facilities across the country, Central Valley is continuously challenged to meet the expanding water treatment demands of a growing residential and industrial community. Read More >> Taskmaster Alleviates Screenings Conveying Problem
|
|
A paper company located in the northeast experienced frequent problems at its wastewater treatment plant. Under normal conditions, sludge from the milling process is directed to this facility and is ground up and placed in a primary clarifier. The sludge is then put through a press where it is dewatered, extracted and sent to a landfill. Read More >> Taskmaster Solves Sludge Problem |
|
A major chemical company had a problem with safe disposal of contaminated plastic trays. The plastic trays needed to be cleaned and separated from the contaminated material, then shredded to a size that could be easily disposed of. The plastic trays were washed and separated from the hazardous material, the cleaned plastic is shredded to the required size in the TASKMASTER TM8500 Shredder. Read More >> Taskmaster TM8500 Shreds Plastic
|
|
The units shred tough, problem materials in sludge or raw sewage lines. In this installation the shredders perform a preparatory function for the sludge stream prior to the dewatering process before the centrifuges. The SUPER SHREDDER ® features a two piece cutter assembly, Chrome Boride coated stainless steel cutters and patented bearing seal cartridges to withstand difficult sludge conditions. Read More >> An army of Super Shreppers Installed |
|
Inmates in correctional institutions have found a new pastime. By flushing oversized items down their toilets they either accidentally or deliberately cause the facility’s wastewater to back up. Often the goal is to gain extra time out of the cell. By flooding their cell or cell block, they force the facility to move them during the cleanup period. These misdeeds have often been rewarding ....that is up until now! Read More >> Super Shredder
|
|
The City of Collinsville had a problem. The screenings coming off of their bar screen were odorous, wet and costly to dispose of. Three container loads a week of screenings were very costly to dispose of. Initial tests of a screenings washer were discouraging. Although the unit worked well initially, it quickly broke a shaft on the shredder. That’s when the town turned to Franklin Miller Inc. for a better solution. Read More >> Spiralift SC Solves Screenings Disposal Problem
|
|
The DIMMINUTOR® screens and shreds oversized wastewater particles in open channels. The unit is manufactured of stainless steel to fit 12" through 42" channels. A clear slot screen allows the three rotary cutters to clear the debris. High capacity and low power consumption makes the DIMMINUTOR® a convenient, dependable and cost effective solution to wastewater solids problem. Read More >> Dimminutor Installation |
|
Repeated plugging of pipelines and pumping systems forced frequent and costly shutdowns for clean-out in the plant of a major chemical manufacturer. Product lumps in the liquid stream built up in the systems, and their clean-out, a difficult and cumbersome job, brought about a considerable amount of lost production time. This was particularly bad because production could not keep up with an increasing product demand under such conditions. Several systems of this kind were involved. Read More >> Production Block Removed
|
|
CCP, Inc., a custom manufacturer of over 1000 private label formulations for the cosmetics industry, had a costly production bottleneck. In the production process, the material is milled to 20 to 200 mesh and re-blended. Incoming material, received in bulk bags or drums, needed to be conditioned to remove agglomerated cakes or lumps. The material could be hygroscopic, have a low melting point, or be exposed to high temperatures during transportation. These agglomerates had been screened or hand sifting in a labor intensive procedure which also resulted in a costly waste of material. Read More >> Crusher Takes Its Lumps
|
|
Maxton Meat Processors, Inc. in Maxton, NC, was experiencing a major pumping problem of their difficult to transport meat products. As part of their process, Maxton employed a pumping system to transport the meat solids at 200 psi. The chicken parts mixed with powders and oils had a tendency to lump up, plugging their pipeline system, preventing the material from being pumped through the system pipes before further processing. Their pumps were clogging and bridging was occurring within the pipeline system. Read More >> Delumper Chews Up Meat Products
|
|
A mineral processing plant in Pennsylvania needed a better way to process large batches of problematic minerals. The contents from 3,200 pound super sacks were placed on a conveyor and then manually hammered to crush them, a labor intensive operation. Adding to the problems, the minerals were lumpy and rock- solid after spending months on a boat from China. The operation was slow and hazardous, labor costs were high and particle size varied widely. Read More >> Cutting Problem Solids Down to Size |
|
A manufacturer of surgical gloves had a problem in establishing a new production line to meet their capacity requirements and quality standards. The major raw ingredient in surgical gloves, natural rubber, was received in the form of full 75 lb. bales of raw rubber. The first step in the process was to reduce the bales to a small size, since dissolving of the full rubber bales would take an unacceptably long amount of time and be very costly. Read More >> Vulcanator Reduces Rubber Bales and Processing Time |
| |
Birmingham
Wastewater Treatment: Taskmaster Inline Grinders Helps Make Sludge
into Forest Feed
Sludge is environmentally recycled - Innovative Recycling Project
Franklin Miller installed six TASKMASTER TM8500 series
inline grinders in front of each primary and transfer sludge pump
to create an environmentally
sound, cost effective solution to sludge disposal for the Birmingham
Wastewater
Treatmen plant.
Read more >> Taskmaster Helps Make Sludge into Forest Feed |
|
Taskmaster
TM1600 shredder: Prison Effluent First Line of Defense
Plant's wastewater discharge and equipment
problems solved Franklin Miller engineers evaluated the Graterford
Prison facility in Pennsylvania and,problems associated with the plant's
wastewater discharge and equipment problems. They suggested one of
their SPIRALIFT
auger screening and grinding systems. Read More >> SPIRALIFT® SLX |
|
DELUMPER®
HD Offers True Grit Crushing Size
reduction equipment handles heavy solids
The powerful DELUMPER® HD Crusher offers
truely robust construction for a variety of tough size
reduction applications.
Read More >> DELUMPER ®
HD offers true grit crushing |
|
SPIRALIFT®
SL Solves Headworks Problem :Wastewater Treatment Plant, Napa Valley,
California.
The Spiralift is a versatile
screening system that is easy to employ for a variety of channel
sizes and capacity requirements..
Read More >> SPIRALIFT®
Protects Napa Valley WWTP Headworks |
|
DELUMPER
LP Protects System from Tramp metal DELUMPER
1075LP handle non-ferrous objects
and metal bolts
A paper products manufacturer has used the
DELUMPER
1075LP in an unusual application on an expensive process line.
Read
More > > DELUMPER LP Protects System from Tramp metal |
|
SUPREME
ROLL MILL Roll Mill reduces glass
particles while controlling dust.
Problem: A manufacturer needed
a mill that could finely reduce highly abrasive glass beads without
creating excessive fines and while controlling dust.. Solution: After
trying their material on a test unit at the factory they found the
performance and output to be just what they were looking for.
Read More >> SUPREME ROLL MILL |
|
|
TASKMASTER
® GRINDER Ends Septage Headache Grinder
solves problems for wastewater treatment plant facility
Proper
treatment of this septage was a problem for the Broward County
Wastewater Treatment Plant facility.
Read
More >> TASKMASTER ® GRINDER Ends Septage Headache |
|
Pipeline Delumper® Product
Information Problem solver for petrochemical
plant
This 24"
PIPELINE DELUMPER® was design to handle 84,000 lbs/hr of polypropylene
for a major petro-chemical company.
Read More >> Introducing 24" PIPELINE DELUMPER - Heavy
Duty In-Line Processor |
| |
Taskmaster®
Shredder Aids Remediation Shredder reduces
large bulk
The powerful TASKMASTER
Shredder is designed to shred solid waste in a broad range of applications
with minimal maintenance. The TM2300 line of TASKMASTER
Shredders successfully reduces bulk up to 80%.
Read
More >> TASKMASTER aids remediation |
|
MORE
INDUSTRIAL APPLICATIONS
MORE
MUNICIPAL APPLICATIONS
|
