|
The TM8500 employs two counter-rotating
cutter stacks that intermesh at close clearance to intensively
shear and shred solids into fine bits. Unlike other units,
the TASKMASTER employs unique cutter cartridges that
combine six thin cutter and spacer disks of old designs into
rugged one piece multi-tooth elements.
Each cartridge is constructed from a one
piece billet, machined, hardened and finished ground for an
unsurpassed level of precision.
The resulting cutter features: increased
unit and cutter strength, the elimination of the use of shims
during assembly, and the complete elimination of stack loosening
and subsequent re-tightening requirements.
|
