TASKMASTER Cutter Cartridges combine 6 cutters and 6 spacers into one piece elements.

See it work->watch videp

The TASKMASTER TM8500 employs two counter-rotating cutter stacks that intermesh at close clearance to intensively shear and shred solids into fine bits. Unlike other units, the TASKMASTER employs unique cutter cartridges that combine six thin cutter and spacer disks of old designs into rugged one piece multi-tooth elements.

Each cartridge is constructed from a one piece billet, machined, hardened and finished ground for an unsurpassed level of precision.

The resulting cutter features: increased unit and cutter strength, the elimination of the use of shims during assembly, and the complete elimination of stack loosening and subsequent re-tightening requirements.

Traditional twin shaft grinders have banks of individual cutters and spacers. These disks each have microscopic spaces between them which eventually compress or increase. The result is the cutters tend to work themselves loose. This, in turn, causes the seals to loose their correct tension and fail, causes stack loosening which degrades performance and causes shaft scoring. Cutter Cartridges eliminate these problems along with the complexity of assembling these units.

PATENTED

With the TASKMASTER there are 1/12 the moving indivual cutting elements as prior units. This means there's less parts to fail..